How to Sew the Penny Dress Button Placket

In this blog we're talking Penny Dress button plackets! The placket on the Penny Dress is constructed in a little bit of an unusual way and we know some of you have found it a little bit of a head-scratcher. So we thought we'd create some in-detail instructions on how to tackle this part of the construction.


Rather than the full dress, I've decided to make the Penny Dress tie-front top from the Add-On Pack, a great version for Spring and Summer. The construction is the same for the tie-front top as it is for the dress, so whichever version you're making these instructions will work for you.

We're picking things up from step 13 for this tutorial, so start by sewing to step 12 as per the instructions. Your Penny Dress should look something like this. The front edges of the facing are sewn down, but the back neck facing is still loose.



Be sure the seam allowances are pressed towards the facing along the front edges.



The first part of the magic button placket creation is to understitch the front facing. Lay the bodice and facing open, and with the seam allowances pressed towards the facing, stitch 2-3mm from the seam on the facing side. This anchors the facing to the seam allowance.



When you are sewing your line of understitching make sure to be as neat as possible, as unlike with traditional understitching, once we're done it will be visible from the outside of the dress.



From the wrong side, the understitching will look like the above. And from the front, it'll look like the below.



Now, rather than pressing the entire facing to the inside of the dress along the seam line, we're going to press part of the facing to the inside at the centre front notch, shown below.



This will mean that the understitched part of the facing remains visible on the outside of the dress.



(Hopefully your understitching is a little neater than mine!)

Once the facing is folded at this notch, the understitching creates detail on the front of the bodice.



And because the understitching is visible on the outside of the dress, the inside of the bodice is free of visible stitching.



Press the facing the whole way down the front of the bodice.



Once the facing is pressed, the understitching appears as topstitching, creating a lovely neat effect.

Now follow steps 14 to 20 as per the instructions. You can see why understitching neatly and evenly is important - mine looks a little bit ropey!



In step 21, once the collar is attached, the button placket is finished with a line of topstitching, which mirrors the line of understitching we did earlier in step 13.



Once topstitched, sew the rest of the dress as normal and voila!

I hope this tutorial helps if you've been having a little bit of trouble with your button placket. If you're still coming unstuck, don't hesitate to get in touch. And if you've made the Penny Dress don't forget to share it with us on Instagram. Use the hashtag #soipennydress so we can see!
Back to blog